LX900 Color Label Printer Specifications

LX900 Color Label Printer Specifications

Print Method: Thermal inkjet with Primera Imaging Perfection enhancements
Print Resolutions: Up to 4800 dpi
Print Speeds: Draft Mode: 4.5” per second
Normal Mode: 1.8” per second
High Quality Mode: 0.8” per second
Print Head: Replaceable Print Head
Inks: Individual ink cartridges for Cyan, Magenta, Yellow and Black
Colors: 16.7 million
Color Matching: Z-Color™ Color Matching Software
Max. Print Width: 8.25" (210mm)
Media Width: 8.375" (213mm)
Media Types: Roll-fed pressure-sensitive labels, or roll-fed tags
Media Sensing: Moveable see-through sensor for die-cut labels;
reflective sensor for labels and tags with black stripe;
can use continuous and pre-printed labels and tags
Supply Roll: 6" (152mm) maximum diameter on 3" (76mm) core.
Ink Level Warning: Calculates actual number of prints remaining based upon ink usage of graphics being printed (patent-pending)
Indicator Lights: Power, Pause, Ink
Controls: Pause, Feed, Unload
Operating Systems: Windows® 7/8/10+ or Mac® OS X 10.6 – 10.10
Data Interface: USB 2.0; External Control Port
Label Design Software: BarTender UltraLite Primera Edition included. Can also be used with most other popular label design and graphics software programs
Electrical Rating: 12VDC, 5.0A
Power Requirements: 100-240VAC, 50/60 Hz, 60 watts
Certifications: UL, UL-C, CE, FCC Class B
Weight: 36.5 lbs. (16.6 kg)
Dimensions: 17.25"W x 9.1"H x 17.25"D
(438mmW x 231mmH x 438mmD)
Included: Bartender Ultralite software for Windows, 4”X3” Tuffcoat™ High-Gloss Paper starter roll and CMYK ink set.

Label Specifications

Max Min
Label width:  8.25" (209.6mm)  0.5" (12.7mm)
Liner/media width:  8.375" (212.7mm)  1.5" (38.1mm)
Label height/length:  17" (431.8mm) 0.5" (12.7mm)
Gap between labels: 10" (254mm) 0.10" (2.5mm)
Width of thru-hole opening: 0.5" (12.7mm) 0.25" (6.325mm)
Distance from edge of media to edge of thru-hole: 2.25" (57mm) 0.20" (5.06mm) 
Reflective/Black Mark Width*: N/A 0.1" (2.54mm)
Max Outer Diameter (OD): 6.0"(152.4mm) N/A
Inner Core Diameter (ID): 3.0" (76.2mm) 3" (76.2mm)
Total Thickness (Liner + Label)**: 0.010” (10 mil) N/A
Distance from edge of media to edge of label: Printer driver assumes 2 mm gap. However, this is adjustable via the left margin offset.

More information can be located in the LX900 User's Manual

* The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.

** This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.